Geotesan Volumetric
Definition
Volumetric mesh for erosion control. Specially designed to prevent erosion (rills and gullies) on slopes.
Thanks to its volumetric configuration allows placement and support of a plant substrate.
VOLUMETRIC GEOTESAN strengthens the vegetation since the roots are fixed in it. It also has a mesh suitable for input to the soil from entering it.
The Volumetric Geotesan consists of:
- a mesh BOP de PP of 40 g/m², it acts as substrate
- a mesh rhombic of PEAD de 125 g/m2, which acts as a base
- a mesh rhombic of PEAD de 125 g/m2, that generates the waves.
Fields of application
Ideal to protect against erosion on slopes: slopes of roads, housing estates, gardens, landfill closures, protections.
How to use
For proper installation of the product should follow the following instructions:
- Regulate the profile of the slope.
- Open two ditches, a coronation, and another at the foot of the slope, firmly anchoring the mesh
Volumetric Geotesan the natural terrain and facilitate unwinding.
- Anchor trench mesh in the crown with steel clamps, one at a meter.
- Unroll the mesh GEOTESAN titrated at the direction of maximum slope,
ensuring that it is securely attached to the ground
- Set the mesh using staples VOLUMETRIC GEOTESAN:
- Angle of slope < 45º 1 Staple each meter
- Angle of slope> 45º 2 Staple each meter
- At each change of roll overlap of a roll 20 cm above the other
- At the joints overlap side of a roll 10 cm above the next
- Once the mesh is firmly attached proceed to a soil contribution
- If topsoil cover all the undulations (2 cm)
- If it is a projection of substrate should apply different layers of soil to cover the product
- In both cases it is advisable to incorporate a hydroseeding in the soil contribution.
- Once the hydroseeding is recommended to extend a capping layer to prevent the wind or the birds carry the seeds.